Lithium Battery-Low Maintenance, Eco-Friendly.Equip with a 32-Bit Controller and 12-Bit Encoder.OLED Display Screen to display operating modes.Three-Axis Gyro Stabilized Brushless Motors are included to balance most mirrorless and DSLR cameras.Uses DSLR and Mirrorless Cameras from 2.0 to 4.5 lbs.360 Degree Movement from All Axis: Pitch, Yaw & Rolle.All-Aluminum Construction for Durability.Although the DGH is specifically designed for Ikan's MS1, DS1, & EC1, it is compatible with most gimbals that feature a 1/4"-20 mounting point on the gimbal's base handle. The built-in tabletop feet allow you to easily calibrate your gimbal hands-free and provide a firm base to set it on when not in use. The shift in weight greatly increases stability and decreases arm fatigue! Depending on your shooting preference, you can operate the gimbal either over-handed or under-handed once it's mounted on the DGH. Comfort Grip handles help reduce fatigue and loss of grip Built-in feet allow the Handle to securely set on a table top for calibration or stationary shooting Made of durable yet lightweight aluminum Will work with most gimbals which include a 1/4"-20 & 3/8"-16 threaded mount on their base Adds enhanced control and maneuverability to hand held gimbal operation Compatible with the ikan MS1, DS1, & EC1 Gimbals along with many other ikan products A 3/8-16 thread located on the bottom allows you to securely mount the EC1 to a tripod, jib or dual handle support system such as the iKan DGH.Ĭontrolling your MS1, DS1 or EC1 Beholder Gimbal is a breeze with Ikan's DGH Dual Grip Gimbal Handle! Constructed out of durable, lightweight aluminum, the DGH's sturdy frame is specifically designed to make gimbal operation much easier! After mounting your MS1/DS1/EC1 on it, two comfortable, padded grip handles allow you to control the gimbal's movement with your upper body instead of just your wrist. The EC1 handle comes with two 1/4-20 mounts that are perfect for mounting accessories such as a light, microphone or monitor. With a newly designed quick-release baseplate system, the EC1 is easy to balance without the need of any tools. Inverted Mode can be operated in conjunction with any of the Lock and Follow Modes.Ī display screen located on the back of the handle conveniently provides you with information on the battery life and operating mode. Switch to Inverted Mode at any time by simply flipping the handle over the camera.
#Ikan beholder 3 full
Finally, the 3-Axis Follow Mode gives you full control allowing you to Pan, Tilt and Roll. In Pitch and Yaw-Axis Follow mode, the EC1 will follow your Pan and Tilt Movements. In Yaw-Axis Follow Mode, the EC1 will only follow your Pan movements. The EC1 features 3 different follow modes. After a few seconds, the camera will lock and hold its position until it is reset back to default. Quickly lock your camera into any position by manually pointing and holding it in any direction.
The camera's composition will stay the same no matter how you move the handle. In Lock Mode, the Yaw, Pitch & Roll axis work together to keep the camera pointed in one direction. Using a 32-bit controller with a 12-bit encoder, the EC1 uses an adaptive PID algorithm to produce a reliably efficient handheld stabilizer. Sony a6300, Sony a7SII, Panasonic GH4 and the Canon 5D Mark III are just a few cameras that the EC1 can handle. With a payload range of 2-4.5 lbs, the EC1 has the ability to stabilize a wide range of today's popular DSLR and mirrorless cameras. rotating brushless motors that give you a limitless range of motion. Dual Grip Handles Feature Built-in Table Top Feet and 4x 1/4"-20 Accessory Mounts Comfort Grip Handles Help Reduce Fatigue and Loss of Grip
#Ikan beholder 3 manual
With an innovative manual point and lock composition adjustment feature
4 Modes of operation with Auto-Inversion and an OLED status display Battery operating life of up to 20 hours with 3 rechargeable 18650 batteries Adaptive PID algorithm produces reliable stability and efficient battery life
Stabilized with a 32-bit controller and a 12-bit encoder system Designed for DSLR & mirrorless cameras up to 5 lbs 3-Axis hand-held gimbal stabilizer with 360deg.
The Dual Hand Grips also feature table top feet and four 1/4"-20 mounts for adding accessories such as lights, monitors and microphones. With the Dual Grip Handles the EC1 experience is improved with added stability and a reduction in arm fatigue.
#Ikan beholder 3 professional
The Beholder EC1 is designed specifically for professional filmmakers looking for a single handheld stabilizer for a large range of DSLR and Mirrorless cameras.
0 kommentar(er)
